Click Adapters & Drivers

adapters driversDetails on the range of Adapters and Drivers available from Rodtech. These adapters will allow you to switch between Click and Mini Click / Click and Buttonlok as well as adapting your click rods to accept various manual sweeping brushes and accessories.

B2 8 Drill Adapter With Button
Rodtech Click Standard Drill Adapter (with button)

This drill adaptor has been specifically designed to fit with the Rodtech Click system. It cannot connect to any other system or rods. This drill adaptor comes with a button so is able to be used for top-sweeping, duct and drain cleaning. It is also good to have in case you are involved in the removal of an obstruction, such as a bird nest.

This product has a number of design features to aid in power cleaning/sweeping. It has a flat side which enables the adaptor to place force onto its corresponding female part without placing strain on the locking button. It also has a tapered button allowing for the smooth connection between the adaptor and any of the Rodtech Click products.

Once connected you will hear a “click” denoting its connection and this cannot be removed until the connecting button is depressed by the operator. Furthermore the drill adapter has a larger button enabling the button to be depressed easier by the operator.

Please refer to the manual for the best guidance on using all of our Rodtech equipment.

Our Rodtech Click products come with a 12 month replacement Warranty. The warranty covers all Non-wearable parts and joints on our Rodtech Click range. It does NOT cover misuse of equipment or when the equipment is used with the tile breakers It does not cover parts that will wear with use, such as head inserts (Nylons, Chain and Wire etc) You must read the manual for guidance. In the unlikely event you will ever need to use this warranty, you will be required to return the product to Rodtech or a Rodtech Agent before a replacement part is supplied (subject to being used in accordance with our user manual).

 

Model: B2-8
Rated 5 stars based on 1 review
£27.00 inc VAT New

 

 
B2-9 Drill Adapter without button
Rodtech Click Standard Drill Adapter (without button)

This drill adaptor has been specifically designed to fit with the Rodtech Click system. It cannot connect to any other system or rods. This drill adaptor comes without a button so is only used for sweeping chimneys or vertical ducting from the bottom.

This product has a number of design features to aid in power cleaning/sweeping. It has 2 flat sides which enables the adaptor to place force onto its corresponding female part without the need of a locking button. It also speeds up the process of power sweeping as you do not need to depress any buttons when removing the adaptor from the Rodtech Click equipment. Further as it has two flat sides it is much easier to line up to the rods being driven in the flue.

It works by using friction and force placed on the adaptor by the drill making it highly reliable. It also comes with the flat facet being marked with a permanent marker so that it is easy to see which way round the adaptor is when in use.

Please refer to the manual for the best guidance on using all of our Rodtech equipment.

 

Model: B2-9
Rated 4.25 stars based on 4 review
£21.00 inc VAT New

 

B2-3 Click to Button
Rodtech Click to ButtonLok Converter

This will convert Rodtech Click system to ButtonLok system, so that you can integrate our latest technologies with our widely used ButtonLok system.

It has a female Rodtech Click ferrule end and converts to a male ButtonLok ferrule end. (So the Button system is in front)

 

Model: B2-3
Rated 5 stars based on 2 reviews
£34.80 inc VAT New

 

 
B2-5 Button to Click
ButtonLok to Rodtech Click Converter

This will convert the ButtonLok system to Rodtech Click system, so that you can integrate our widely used ButtonLok system to our latest Rodtech Click technologies.

It has a female ButtonLok ferrule end and converts to a male Rodtech Click ferrule end. (So the Rodtech Click systems in the front)

 

Model: B2-5
Rated 5 stars based on 3 reviews
£34.80 inc VAT New

 

B2-2 Click to 3 quarter
Rodtech Click to 3 Quarter Rod Adapter

This product allows the consumer to benefit from being able to attach traditional sweeping brushes to the Rodtech Click lock rods.

Although the rods are able to be used clockwise and anticlockwise, it is important to remember that when using the adaptor, you can only use the rods in a clockwise direction.

This product is not designed to allow the user to put traditional hand sweeping brushes onto the rods, and use them for power sweeping as this can cause damage within some flue types.

 

 

Model: B2-2
Rated 3.5 stars based on 2 reviews
£34.80 inc VAT New

 

B2-6 Uni to Click
Universal to Rodtech Click Converter

This adapter will convert a standard rod to a male click rod outlet but the rod can not be used for power sweeping or used in an anticlockwise direction.

 

Model: B2-6
Rated 0 stars based on 0 reviews
£34.80 inc VAT New

 

 

 

B2-1 Click to HWW
Universal to Rodtech Click Converter

This item is to allow half inch Whitworth brushes to be used with Rodtech Click rods should the operator desire to manual sweep.

It comes with a grub screw so that you can secure your desired brush to the adaptor to be able to turn your Rodtech Click rods clockwise and Anti-clockwise when manually sweeping.

Standard brushes are NOT designed for power sweeping and can only be used for manual sweeping.

 

 

 

Model: B2-1
Rated 0 stars based on 0 reviews
£30.60 inc VAT New

 

 

A2-3 Click to M10
Rodtech Click to M10 Adapter

This item is to allow M10 brushes and attachments to be used with Rodtech Click rods should the operator desire to manual sweep.

It comes with a grub screw so that you can secure your desired brush to the adaptor to be able to turn your Rodtech Click rods clockwise and Anti-clockwise when manually sweeping.

Standard brushes are NOT designed for power sweeping and can only be used for manual sweeping.

 

 

 

Model: A2-3
Rated 0 stars based on 0 reviews
£30.60 inc VAT New

 

 

B1-3 Rodtech Click to Mini Click Adapter
Rodtech Click to Mini Click Adapter

This product enables you to connect the Rodtech Click Drill adaptor to the 8mm Brass Click system.

This has been specifically designed to allow more control over longer distances when using the 8mm equipment, by allowing connection of the Rodtech Click 1000x12mm rods to the bottom of the 8mm Brass Click rods via this adaptor.

This adaptor requires the use of the Rodtech Click drill adaptor (with button).

Our Rodtech Click products come with a 12 month replacement warranty. The warranty covers all Non-wearable parts and joints on our Rodtech Click range. It does NOT cover misuse of equipment or when the equipment is used with the tile breakers It does not cover parts that will wear with use, such as head inserts (Nylons, Chain and Wire etc) You must read the manual for guidance. In the unlikely event you will ever need to use this warranty, you will be required to return the product to Rodtech or a Rodtech Agent before a replacement part is supplied (subject to being used in accordance with our user manual).

 

Model: B1-3
Rated 0 stars based on 0 reviews
£36.24 inc VAT New